Glass Geocomposites
The glass geocomposites is the non-infiltrationthe materials base of fiberglass geogrid and geocloth.
Glass Geocomposites
Product introduction
The glass geocomposites is the non-infiltrationthe materials base of fiberglass geogrid and geocloth. To prevent road surface crack caused by foundation crack reflection. The chemistry stability is good, the hot-stability is good, anti-weary dehiscence, anti-low temperature shrinkage crack, postponement reduction reflection crack.
Product features
1.Width 1M--5.3M,the weight is 200--1500mg/m.
2.Tensile, slitting-resistant, bursting, and other indicators of high physical and mechanical properties.
3.The compound earthwork membrane uses geocloth as the basic; therefore it has geocloth to isolate, draining water, reinforcement, protection, but also has the anti-seepage function.
4.Because it selects the high polymer material, and the technique of production increased the antioxidant, therefore may use inn the non-conventional temperature environment.
Product function
It can widely apply in the water conservation, the municipal administration, the building, the transportation, the subway, the tunnel, the environmental protection and so on.
Product specifications and performance parameters
Performance Specification
JH30B
JH40B
JH50B
JH60B
JH80B
JH100B
Tensile strength
KN/m
warp direction
30
40
50
60
80
100
weft direction
30
40
50
60
80
100
mesh size mm
25.4×25.4
width m
5.4
elongation %
≤3